The PST LKO Rotating Sealing Table is designed for sealing insulated glass units and uses a variable speed rotational control with selectable 90 or 360 degree index rotation. The power operated table is used to facilitate the sealing of single insulating glass units up to 250 pounds.
The LKO Rotating Sealing Table cup frame is extendable from minimum 16” x 16” to maximum of 57” x 57". The maximum recommended sized IG Unit for sealing is 50” x 50”. The unit includes vacuum cup attachment device for sealing 6” x 6” to 15” x 15” sized IG units.
The PST LKO is the preferred sealing table for speed of production and operator satisfaction. This high quality table can handle all types and sizes of IG Units and features urethane roller casters to protect glass units from scratching.
The frame is constructed of heavy duty tubular steel that is topped with a steel sheet upon which urethane swivel rollers are mounted. The footprint size of the table is 42” x 42” upon which a rotating 7” diameter vacuum cup support frame is corner mounted. The Vacuum cup support frame will retract to a minimum size of 16” x 16” and will extend to a maximum size of 57” x 57”.
The PST LKO Rotating Sealing Table is equipped with a small unit vacuum cup device that will mount on top of the rotating frame for handling small size IG units. The table is capable of processing minimum sized IG units of 6” x 6” to a maximum size units of 60” x 80”.
The PST LKO rotating vacuum cup frame is raised and lowered by a foot pedal switch actuating 3” x 4” . The cup frame is 34" high in the lowered position and 36" high in the raised position. The rotation of the vacuum cup frame is powered by a DC drive motor with speed control. The rotation is actuated by an electrical foot pedal. The table will not rotate unless in the raised position. The rotating cup frame is index rotated at a selectable 90 or 360 degree mode and is PLC controlled.
The PST LKO Rotating Sealing Table operates on 115 volt, 60 cycle, single phase AC power and a minimum of 85 psi compressed air @ 3 cfm.
Because of directional rotation and speed control the sealant applicator can stand in one position and work at his own pace. The table also includes height adjustment for ease of applicator control.