The PST L-Frame 100 Slot Harp Storage Rack is used for storage of cut glass lites for processing into IG Units. The floor is flat with glass handling controlled by a single set of dividing vinyl covered harp strings.
The PST HR-1 rack base and back vertical members are welded construction and the arms are bolted to the vertical back. The harp strings are vinyl tube covered and the slots are 7/16" wide for storage of two (2) glass lites per rack slot. Harp strings are removable so that vinyl tubing can be replaced when it becomes worn. The PST HR-1 L-Frame 100 Slot Harp Storage Racks are stackable to ten high for economical shipment and racks are mounted on four casters ( two swivel & two fixed) with one (1) floor lock. Flooring consists of a solid slab of HDPE for glass contact surface.
The PST HR-1 L-Frame 100 Slot Harp Storage Rack is shipped with arms, harp strings and casters removed. Assembly only requires the installation of four (4) casters and the bolting on of the two arms plus installation of the covered harp strings. All hardware required for assembly is included.
Casters: 6 inch Diameter - Two ( 2 ) Swivel & One ( 1 ) Fixed. Load Capacity: 3,000 pounds Rack Frame: Welded Tubular Steel Rack Base: Solid slab HDPE sheeting mounted on ¾” OBS backer board Slot Numbering: Standard - Engraved plate with numbers 1 thru 100